Liebert XDU450 manual specifies agreement of three secondary supply-temperature sensors
T2a/T2b/T2c spread <0.3 °Cobserved
| Value kind | observed — Reported measurements, counts, and specifications keep the precision and scope stated by their source; an exact specification is not treated as a range. |
|---|---|
| Scope | Agreement check for this manual and sensor set only. It does not establish absolute accuracy, flow, heat-removal capacity or permission to service. The manual separately calls for a calibrated reference check. |
| As of | 2022-07 |
| Source | Vertiv, Liebert XDU450 Operation and Maintenance Manual SL-70617 Rev. B, July 2022, §5.3. |
| Review | checking…cadence-derived review 2022-10-29 · standard cadence |
| Recorded changes | none recorded |
| Claim id | part14-xdu450-sensor-consistency |
Where the guide uses it
Not quoted in a chapter yet; it is kept in the curated register.
← Full numbers register — every date-stamped figure in the guide, with revision history.