immersion component-swap service time vs air-cooled — no hot-swap, full lift-out, fluid drain, drying and refill
6–12 h vs 30–60 minestimate
| Value kind | estimate — Interpret this value according to its displayed kind, scope, source, and as-of date. |
|---|---|
| Caveat | Modeled service-time comparison from one analysis, not a matched repair sample or a fleet MTTR dataset; the gap moves with tank volume, drain automation, fluid type and whether one node or a whole tank is taken down. The article does not establish a 3x mean-time-to-repair multiplier. |
| As of | 2026 |
| Source | Energy Solutions / practitioner data · Maintenance accessibility: "Total service time for simple component swap: 6-12 hours versus 30-60 minutes in an air-cooled environment"; drain 2-4 h for a 1,000-litre tank, 30-90 min component drying. |
| Review | checking…review by 2027-01-01 · standard cadence |
| Recorded changes | last 2026-09-04 · 2 revisions tracked |
| Claim id | immersion-hardware-mean-time-to-repair-vs-air |
Where the guide uses it
← Full numbers register — every date-stamped figure in the guide, with revision history.